Showing posts with label Network Tutorial. Show all posts
Rogue AP Feature On Dwl-2100 (Upgrade Firmware)
You can even have a malicious insider or, worse, an outsider on an adjacent floor, which has set up a rogue AP for your users to connect to. This is a very simple setup for the hacker...Read more
All he has to do is set up an AP using your SSID and wait for your wireless systems to associate with it. There are also programs that automate the process of creating “fake” Apes. If this occurs, hackers can capture virtually all traffic flowing to and from your wireless clients (Wireless Hacking for Dummies:2005). So, Rogue AP Detection is User Can check Rogue Access Point or Ad-Hoc Device.
Rogue AP Detection
User can check Rogue Access Point or Ad-Hoc Device
BSS Type
once both are selected, Ad-Hoc mode and AP mode would be Site Surveyed.
If only Ad-Hoc Mode is selected, only Ad-Hoc setting device would be revealed onsite survey table.
If only AP Mode is selected, only AP setting device would be revealed on site survey table.
Band
Once 11b is selected, 11b band supported device would be Site Surveyed.
If 11g is selected, 11g band supported device would be revealed on site survey table.
If 11b is selected, 11b band supported device would be revealed on site survey table.
Security
When different security type is selected, matched device would be revealed on site survey table.
Rogue AP List
User can confirm each site survey data. Once defined as legal device, record would be shown and stored on AP List.
AP List
Once surveyed devices are confirmed legal / neighborhood AP or WLAN device and have been added in the AP List, they are shown here. Click Del
Before it, You must upgrade old to new firmware (download here). Look the picture!
Remember! Do Not Power Down Your Device During This Process. Doing So May Physically Damage Your DWL-2100AP. (If your browser does not redirect to the web page automatically, please press the refresh button.)
Copy this code into your website if you want to link this page:
Tag :
D-link,
Network Tutorial
Easy Secure Your Home Network
My friends ask to me, how to control their wireless home network? You can control it, with Network Magic, I suggest. How about security issues? Read more..Network Magic continuously checks your network, including your network connections, computers, devices, and printers.You can get network status information quickly and easily. But, If you see the new device not your network, you can set (it device) to intruder. [Right Click] and select [track as intruder]. The Status Center presents this information in automatically updated panels, similar to the dashboard of your car. From a single page, you can see the following activity about your network and devices:
- Connection — if a PC on the network loses Internet connectivity, the link Not Connected appears. You can use Troubleshoot Connection to help determine the cause of the problem and get a suggestion for a solution. You can also check the speed of the connection.
- Network Magic — if your copy of Network Magic is out of date or you are unsure of the version you have installed, you can easily check the version and connect to the download area for new releases.
- News and Information — when you want to learn tips and tricks about keeping your network running smoothly and effectively, you can find current networking and product articles and information.
- Health and Security Alerts — If you aren’t sure the last time you installed updates to Windows, or you want to track intruders, you can view network alerts and access ways to fix the problem.
- Wireless Protection — you can prevent intruders from accessing your wireless network by using the Wireless Protection settings. These settings allow you to lock your network to prevent unauthorized users from logging on, hide your network name so others can't see that your network exists, and set up wireless security.
- Activity Monitor — when you want to check recent log-ins, network additions, and usage for a specific computer, you can view the Network History report.
- Remote Access — once you set up your Net2Go Web site, you can access the site and any details about Web-based file sharing and settings.
Special thanks’. Network magic : Smart Home Networking.
Tag :
Network Tutorial
DWL-2100AP Installation Guide
Follow the Instructions:
- Connect the power adapter to the receptor and plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation.
- Insert one end of the cable to the ethernet port on the back panel and the other end of the cable to the computer that will be used for configuration or to the local network.
- Assign a static IP adress for your computer (The IP Address must be within the same range as the access point. The IP Adress of the Access Point (DWL-2100AP) is 192.168.0.50, you can assign192.168.0.67 for your computer). Assign a subnet mask of 255.255.255.0. (look picture).
- Open Your browser and type 192.168.0.50 into the URL address box [enter].
- Type "admin" for the username and leave the password field blank [Click OK].
- Once you have logged in, the Home screen will appear [Click Run Wizard].
- You will see the following screen [next].Insert your password and verify [next].
- Type yor SSID as you like [next].
- Insert your password for WEP [next].
- Click [restart] for save reboot your setting.Click [close].
- Enjoy
Tag :
Network Tutorial
DWL-2100 AP Guide Istallations
Follow the Instructions:
Connect the power adapter to the receptor and plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation. Insert one end of the cable to the Ethernet port on the back panel and the other end of the cable to the computer that will be used for configuration or to the local network. Assign a static IP address for your computer (The IP Address must be within the same range as the access point. The IP Address of the Access Point (DWL-2100AP) is 192.168.0.50, you can assign192.168.0.67 for your computer). Assign a subnet mask of 255.255.255.0. (Look picture).
Open your browser and type 192.168.0.50 into the URL address box [enter]. Type "admin" for the username and leave the password field blank [Click OK]. Once you have logged in, the Home screen will appear [Click Run Wizard]. You will see the following screen [next]. Insert your password and verify [next]. Type your SSID [next]. Insert your password for WEP [next]. Click [restart] for save reboot your setting. Click [close]. Enjoy!
Tag :
D-link,
Network Tutorial
DWL-2100 Access Point Setting
This is old tutorials how to setting you’re D-Link 2100 Access Point. But, we must share this article for beginner. So, I’m sorry for network administrator, hacker, etc.As you know, D-link 2100 AP as same name as DWL-2100 AP. This Access Point has two method setting; first, set with AP manager method. Second, set with telnet menu. Note, before set your access point, you must set LAN IP to [use the following IP Address]. Or, in another term, set your LAN IP to static. For example, insert to your LAN IP 192.168.0.57 besides 192.168.0.50. You cannot configure your setting if you insert to LAN IP 192.168.0.50. Because, the default WAN IP of D-link 2100 AP is 192.168.0.50. We recommendation, before you want set your access point; set to default setting. Its way pushes the [reset button] for 10 seconds.
All right, if you want configure your D-link 2100 with AP Manager Software, it’s so easy. You have this software include in D-link 2100 AP Driver CD. If you don’t have it, download to D-link. Next step, insert Your IP 192.168.0.50 in your browser. Insert username is “admin” [default] and password “leave blank”. Find your information around your AP.
Next, if want configure with telnet method. Click [start windows] [run] type [cmd] [enter]. Now, you can see command prompt. Type “telnet 192.168.0.50” [enter]. Look! Telnet method entered to access point setting. Insert admin for login and leave blank password and [enter].
D-link Corp. Access Point Wlan1 ->(type) get [space] power <= display your txpower.
D-link Corp. Access Point Wlan1 ->(type) set [space] overridetxpower [space] 19 <= boosting up txpower to 19 dBm.
D-link Corp. Access Point Wlan1 ->(type) help <=display all information to set your AP.
Look sample picture setting code! Note, do not can all like my “Crazy AP”. Safe to try!
Tag :
D-link,
Network Tutorial
Multi-SSID With DWL-2100 AP
Multi-SSID is feature to secure your system from intruders. With DD-WRT WRT54GS, you can make 4 Multi SSID (Mac Cloning). But, you can make 8 Multi-SSID with DWL-2100 AP. Before it, you must upgrade firmware from default version (V.201) to V.230 or V.240. See our last articles how to upgrade DWL-2100 AP firmware. Let’s begin:
1. Set your LAN to static IP (for example) 192.168.0.67.
2. Login default (username: admin) (password: none).
3. Click [advance]. You must set your system to Access Point.
4. Click [Multi-SSID].
5. Select [Enable Multi-SSID] on the “check box’.
6. Set in the [index slide], as you need.
7. Click [Save to table]. Manage it as you like.
8. [Apply] your setting.
9. Reboot your LAN system.
Look at picture...
Tag :
D-link,
Network Tutorial
DWL-2100 AP Upgrade Firmware : Crazy Acces Point
Make your DWL-2100 AP "Crazy Acces Point", let's upgrading your system. Follow this step :
1. Select or click DWL2100AP-firmware
2. Set your LAN to static IP (for example) 192.168.0.67.
3. Login to D-link. Type 192.168.0.50.
4. Insert password (username: admin) (password:blank)
5. Click [tools].
6. Click [firmware].
7. Put your new firmware .
8. Click [OK].
9. Please wait...don't touch reset button or anything.
10.
click here to preview the web-based configuration wizard From D-link 2100 AP Website
1. Select or click DWL2100AP-firmware
2. Set your LAN to static IP (for example) 192.168.0.67.
3. Login to D-link. Type 192.168.0.50.
4. Insert password (username: admin) (password:blank)
5. Click [tools].
6. Click [firmware].
7. Put your new firmware .
8. Click [OK].
9. Please wait...don't touch reset button or anything.
10.
click here to preview the web-based configuration wizard From D-link 2100 AP Website
Happy.... Enjoy with Your Wireless Access Point new face.
Tips! Before you want to upgrade firmware system, see you AP version. Capturing of your version image (press [print screen] on keyboard and paste with “paint”). Compare before and after firmware upgrade. If you have “error system” like web page DWL-2100 AP cannot be show. Or you cannot configure with telnet mode. The other term, you system be failed. Don’t panic! Press reset button around 5-10 second. It will be recover your default system.
Default version...
New Version...
Before upgrde firmware....
After....
Copy this code into your website if you want to link this page:
Tag :
D-link,
Network Tutorial
Active Sniffing With Cain & Abel
Many kinds for find your password target. But Cain and Abel is our choice. Cain and Abel is a complete password recovery tool for Microsoft Operating Systems.It allows easy recovery of several kinds of passwords by sniffing the network. APR (ARP Poison Routing) is a main feature of the program. It enables sniffing on switched networks and the hijacking of IP traffic between hosts. The name "ARP Poison Routing" derives from the two steps needed to perform such unusual network sniffing: an ARP Poison Attack and routing packets to the correct destination. We share with you now, how to sniffing ARP network with the active scanning method.
- Click to active sniffer
- Click to active ARP.
- Right click to Mac address scanning.
- Click here to ARP poisoning
- Click to ARP poison routing
- Click your Router IP
- Select your All IP Address Client
- Click okay
- Click password tab
- Find your target password
Okay, I think it made easy to attack your password target. Special thanks to Cain & Abel. Download Cain and Abel now.
Tag :
Hacking,
Network Tutorial
